High purity argon gas description
Argon is present in atmosphere to the extent of about 0.93%. It is colorless, odorless, tasteless and non-toxic gas. It is non-flammable and is a highly inert gas. Apply modes for argon are liquid and as compressed gas. Argon is a member of a special group of gases known as the “rare,”“noble,” or “inert”gases.
Large argon tank applications
Iron and Steel
1.Used for industrial and hospital analyses quality control.
2.Protecting welds against oxidation reduction of welding emissions.
3.Used in its pure form for protection against impurities.
4.Stirring and decarburizing steel (especially stainless alloys).
5.Luminescent mixtures for filling light bulbs and fluorescent tubes
Inflating car airbags.
Physical and Chemical Properties
Appearance : Liquefied gas. Colorless
Odor : No odor warning properties
Odor threshold : No data available
pH : Not applicable
Melting point/range : -308 °F (-189 °C)
Boiling point/range : -303 °F (-186 °C)
Flash point : Not applicable
Evaporation rate : Not applicable
Upper/lower explosion/flammability limit : No data available
Vapor pressure : Not applicable
Water solubility : 0.067 g/l
Relative vapor density : 1.38 (air = 1) Heavier than air
Relative density : 1.4 (water = 1)
Partition coefficient (noctanol/water) : Not applicable
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity : Not applicable
Molecular Weight : 40 g/mol
1. All the operation staff must accept the safety operation training, strictly abide by the operation procedures.
2. The operation of the disposal of bottled gas:
A) Using appropriate trolley to move cylinders, shall not be towed, sliding or rolling cylinder flat on the ground. Banned hold a cylinder valve or valve cover to direct rolling cylinders;
B) At any time, gas cylinders should be properly fixed, prevent dumping or hit, prevent damaged cylinders and accessories. A cylinder valve cover only in cylinders placed in place, can only be removed when everything is ready to use;
C) it is prohibited to use any part of the open flames or other heat source heating cylinder. Ban welding on gas bottles arc;
D) a cylinder is prohibited to knock, collision or fastening/finishing under pressure;
E) should be paid attention to when choosing pressure reducing valve, inlet pressure rating of the valve shall not be lower than the cylinder pressure;
F) when cylinders interrupt or suspended use, cylinder valves should be completely shut down;
G) cylinder valve should be opened slowly, and the gas flow rate can’t be too fast. If cylinder valve damaged or can't open with the hand, not using a wrench, tool to forced it to open the gas cylinders. Those cylinders shall be returned to the supplier, and attach labels, briefly the reason why write this bottle can't use;
H) the gas cylinders are banned exhausted, suggested that have a certain amount of residual stress to prevent other gas flow backward;
I) after use, close the cylinder valve, equipped with a good bottle cap.
Packaging & Delivery
40L steel cylinder
ship in 15 days after payment
1.What is your MOQ? Can we get small quantity order?
A：Our MOQ is 50 Piece/Pieces. We can accept small quantity orders.
2.How to start order?
A：You need offer us your requirements of the gas you need, such as ndustry gases ,special gases and forming gas and so on. Then we offer you reasonable price and send you match samples. When you confirmed the samples and the price, you can order online or offline.
3.May i know which payment will be accepted by your company?
A：So far 100%T/T before shipment, and 30% deposit paid by T/T, balance paid by L/C are available.
4.Is your price competitive?
A: Only good quality gas we supply. Surely we will give you best factory price based on superior product and service.
5.All the cylinders can recycle?
A: Usually seamless steel cylinder can recycle to use in 20 years. The disposable cylinder is only for use one time.
6.Shall we send back the cylinders to China to refill gas again?
A: Yes, when you ordered our cylinders, next time, you can send back the cylinders to fill gas again. You just need to tell us before you export. We will handle all the import customs clearance formalities.
If you are looking for liquid argon tank, Yuantong argon gas will be your best choice, we will provide you with the best quality products and services, sincerely welcome to buy our products.